when install windows what drivers are to be installed before installing

C H A P T E R iii

Installing the Windows Bone and Drivers

The Sunday Ultra 20 M2 Workstation is supported to run Windows XP SP2 32-bit and XP 64-bit, Windows 2003 Enterprise SP2 32-flake/64-bit, Windows Vista Ultimate 32-bit/64-bit.

You have several options for installing Windows:

Install Windows using a Windows CD, and manually load drivers during and after the Os installation.
Utilise the XpReburn script to create a Windows CD that includes platform and NVIDIA RAID drivers, then apply the newly created CD to install the OS. (You must install video drivers separately.)
Create a RIS image of the Windows Os and drivers, then install the OS from a RIS server.

The social club of Windows OS and driver installation is as follows:

1. If necessary, set the BIOS for Windows. Run across Section 3.1, Setting the BIOS for the Windows OS.

ii. If required, remove the preinstalled Solaris OS. See Section 3.2, Agreement the Diagnostic Partition and Section 3.three, Erasing Partitions on the Boot Hard disk.

three. Install the Bone.

Section 3.iv, Installing Windows 2003/Vista/XP OS Drivers
Department 3.iv.ane, Installing RAID Drivers Using the 2003Reburn/XPReburn Script or
Department iii.four.2, Installing RAID Drivers Using a Kick Diskette.

four. If desired, create a Windows Os RIS prototype on a RIS Server and install the image on a workstation (see Appendix A).

Note - Do not delete the diagnostic segmentation when you perform the OS installation. If the diagnostic division is erased, the Lord's day Ultra 20 M2 Workstation Service Manual contains instructions on using the Create Diagnostic Partition option on the Sun Ultra 20 M2 Workstation Tools and Drivers CD.

Note - Windows XP cannot mount the diagnostic partition. A workaround is detailed in the Dominicus Ultra 20 M2 Workstation Service Manual.

iii.ane Setting the BIOS for the Windows OS

This department describes how to prepare the system BIOS and NVRAID BIOS for the Windows Bone and NVRAID.

3.one.1 Setting the Arrangement BIOS for Windows OS and NVRAID

To configure the system BIOS for a Windows Os and, optionally, NVIDIA RAID (NVRAID), perform the post-obit procedure.

1. Power on the workstation.

2. Perform the following steps to set the system BIOS for Windows:

a. Press the F2 key at the Sun logo screen to enter the BIOS Setup carte du jour.

b. Select the Advanced BIOS Features carte du jour.

c. Change the Installed O/S option to Win2k/XP.

3. If you lot volition use the onboard NVIDIA RAID controller, perform the following steps to prepare the system BIOS for NVRAID. Otherwise, go to Step 4.

a. Select the Advanced BIOS Features Carte du jour.

b. Select the Integrated Peripherals menu.

c. Modify the setting for NVRaid Configuration to Enable.

d. Enable RAID on the channels displayed that have disks.

4. Press the F10 key to salve your changes and exit the system BIOS.

iii.i.2 Setting the NVIDIA RAID BIOS

To configure the NVRAID BIOS, perform the following procedure.

1. Reboot the workstation.

2. Printing the F10 key to enter the NVRAID BIOS.

3. Select the blazon of RAID assortment yous desire to create (mirroring, striping, and then on).

iv. Add together the appropriate disks to the array.

5. Press the F7 fundamental to complete this part of the configuration.

half-dozen. Select Yes when asked if you want to Clear Disk Information.

7. If desired, set up the array to exist the Boot Array (this is typically the desired configuration).

8. Printing Ctrl-X to leave the NVRAID BIOS.

3.ane.3 Setting the LSI RAID Configuration

To configure a RAID Assortment in LSI:

ane. During the BIOS portion of the boot, blazon ctrl-C to open the LSI configuration tool.

two. Select the desired SAS controller and printing Enter.

3. Select RAID properties.

4. Select the blazon of RAID array yous would like.

5. Cull the volumes you would like to include in the RAID.

Note - Do not mix SAS and SATA volumes within a given RAID.

6. When the array is ready, save changes and exit.

iii.2 Agreement the Diagnostic Partition

Diagnostics (system test) software is included on the Tools and Drivers CD. Instructions for using the diagnostics software are provided in the Lord's day Ultra xx M2 Workstation Service Transmission.

A diagnostic division is required for the exam scripts to write their log files. Without a diagnostic segmentation, the merely output is the display on the diagnostic screens.

The diagnostic segmentation is preinstalled on the Sunday Ultra 20 M2 Workstation. You lot do not demand to reinstall the diagnostic sectionalisation unless y'all removed it.

If you removed the diagnostic sectionalisation, you can re-create it using the Create Diagnostic Partition pick on the Tools and Drivers CD. See the Sun Ultra xx M2 Workstation Service Manual for instructions.

Note - Windows XP cannot mount the diagnostic division. A workaround is detailed in the Sun Ultra xx M2 Workstation Service Manual.

3.3 Erasing Partitions on the Boot Hd

To erase all partitions on the kick hard deejay drive, except the diagnostic partition, use the Erase Primary Boot Hard Disk option on the Tools and Drivers CD main menu.

Circumspection - The Erase Master Boot Hard disk selection erases all partitions and all user information on the hard drive, except the diagnostic partition. Be sure to back up all data on the hard drive before performing this activity.

Follow this procedure to erase the primary boot hard disk.

ane. Back upwardly all information that y'all want to salve on the hd.

2. Insert the Tools and Drivers CD into the workstation.

3. When the main menu appears, select the following pick from the Tools and Drivers CD primary menu:

3. Erase Primary Boot Hard disk

This choice erases all partitions currently located on the primary difficult disk drive, except for the diagnostic sectionalization. The diagnostic partition, if information technology is present, remains untouched.

4. When prompted, ostend that you lot wish to delete the partitions.

5. When prompted, press any key to reboot the organisation.

3.iv Installing Windows 2003/Vista/XP OS Drivers

The Sun Ultra xx M2 Workstation Tools and Drivers DVD contains NVRAID, NVIDIA display, and NVIDIA chipset drivers for Windows 2003/Vista/XP. If yous are installing NVRAID drivers, yous volition demand to use the 2003Reburn/XpReburn script to create a new Windows 2003/XP CD containing the necessary drivers, or create a boot diskette to install the drivers before installing the Windows 2003/XP operating system.

The social club of Windows 2003/Vista/XP driver installation is equally follows:

1. If you plan to use the workstation RAID functionality, install the NVRAID drivers earlier installing the operating system by using one of the post-obit methods:

Installing RAID Drivers Using the 2003Reburn/XPReburn Script.
Installing RAID Drivers Using a Boot Diskette.

2. Install the operating system.

3. Using the Tools and Drivers DVD, install the display and chipset drivers as described in Installing Display and Chipset Drivers for Windows 2003, Vista or XP.

4. If necessary, install the RealTek audio driver as described in Installing RealTek Sound Commuter.

Note - The Tools and Drivers DVD does not mount the diagnostic segmentation for Windows XP software.

3.4.i Installing RAID Drivers Using the 2003Reburn/XPReburn Script

The Sun Ultra xx M2 Workstation Tools and Drivers DVD contains a script that enables you to create a new Windows 2003 or Windows XP CD with the needed RAID drivers. After the new CD is created, you lot tin kicking the CD and install Windows 2003 or XP ordinarily. This new CD automatically installs the drivers, making it unnecessary to use a USB diskette bulldoze and to install the NVRAID drivers.

For specific and electric current information about the Reburn scripts, encounter the clarification at the height of the script which is located in the XpReburn or 2003Reburn directory nether the /drivers/utilities/ directory on the Tools and Drivers DVD.

To install Windows 2003 or XP using a RAID configuration, you need the following:

A system running Solaris Operating Organization for x86 Systems, RHEL 3. RHEL four, RHEL 5, or SUSE Linux Enterprise Server (SLED 10)
Access to a CD burner
A blank CD-R or CD-RW
A Windows 2003 or Windows XP Professional Installation CD (retail media simply--not an OEM version)
A Sun Ultra 20 M2 Workstation Tools and Drivers DVD

To create a Windows CD with the Sun Ultra 20 M2 Workstation drivers:

1. On a arrangement Solaris x86, Solaris OS (SPARC Platform Edition), or RHEL 3, RHEL 4, RHEL 5, or SLED 10 software, insert the Sun Ultra 20 M2 Workstation Tools and Drivers DVD.

2. Equally superuser, create a temporary directory with at least one.2 Gbytes of space.

For example:

three. Re-create the OS Reburn_ version .zip file to that directory.

Where OS is either 2003 or XP and version is the electric current version of XpReburn.

For example:

            #            cp /drivers/utilities/XpReburn_1.0.zip /files

iv. Eject the Tools and Drivers DVD and insert your retail Windows 2003 or XP 32 Professional person Installation CD.

5. Unzip the Bone Reburn_ version .zilch file.

For case:

            #                          unzip -q XPReburn_1.0.zip

6. Run the Reburn script.

For example:

The script displays the driver files it expects to exist located in the current directory. When all four driver files have been downloaded into that directory, the script creates a new ISO prototype and then automatically burns that ISO image onto a CD if the organization has a CD burner.

seven. Later on the CD has been created, install Windows Bone software on the Sun Ultra 20 M2 Workstation.

8. After the OS installation is complete, install the NVDIA display drivers described in Installing Display and Chipset Drivers for Windows 2003, Vista or XP.

3.four.2 Installing RAID Drivers Using a Boot Diskette

Note - This footstep is not required with Windows Vista.

This section explains how to create a boot diskette for the NVIDIA RAID drivers using the Dominicus Ultra 20 M2 Workstation Tools and Drivers DVD, and how to install the drivers onto your workstation.

To install the NVIDIA RAID drivers using a kicking diskette, you lot need the post-obit:

A organization running Microsoft Windows software, which has a CD and
diskette drive
A blank diskette
A Sun Ultra 20 M2 Workstation Tools and Drivers DVD
A USB floppy bulldoze
A Windows 2003 or Windows XP Professional person Installation CD (retail media only--not an OEM version)

This department contains the post-obit subsections:

Creating a Kick Diskette for NVIDIA RAID Drivers
Installing Windows 2003 or XP and NVIDIA RAID Drivers

three.four.2.1 Creating a Boot Diskette for NVIDIA RAID Drivers

To create a boot diskette for NVIDIA RAID drivers:

one. On a system running Microsoft Windows software, insert the Sun Ultra 20 M2 Workstation Tools and Drivers DVD.

2. Change to the appropriate directory on the Tools and Drivers DVD by typing the following:

            C:\> cd/D D:\drivers\windows\            Bone            \chipset\IDE\            Os            \SATARAID

Where OS is the directory for Windows 2003, XP 32-bit or XP 64-bit.

three. Insert a blank diskette into the workstation.

4. Select all files in the directory and re-create them to the diskette bulldoze (a:).

3.4.ii.2 Installing Windows 2003 or XP and NVIDIA RAID Drivers

To install Windows 2003 32-bit/64-bit or Windows XP 32-bit/64-bit with the NVIDIA RAID drivers:

1. Ensure that the system BIOS and NVIDIA BIOS is configured for RAID functioning. Meet Department 3.1, Setting the BIOS for the Windows OS.

2. Attach a USB diskette bulldoze to the workstation.

3. Insert a Windows 2003, or XP Installation CD into the DVD drive.

4. Press the F6 primal to install the third-party RAID driver.

5. Printing the S key and the Enter key to specify boosted drivers and insert the diskette created in Creating a Boot Diskette for NVIDIA RAID Drivers.

Annotation - The Tools and Drivers DVD does not mountain the diagnostic partitioning for Windows 2003/Vista/XP software.

half-dozen. Select the NVIDIA NForce Storage Controller.

seven. Press the S key and the Enter fundamental to specify boosted drivers.

eight. Select the NVIDIA RAID Grade DRIVER.

ix. Printing the Enter key to go along the Windows installation.

10. After the Os installation is complete, install the NVDIA display and chipset drivers as described in Installing Display and Chipset Drivers for Windows 2003, Vista or XP.

iii.iv.two.3 Installing Display and Chipset Drivers for Windows 2003, Vista or XP

Annotation - If yous accept created a Windows CD containing NVRAID drivers using the XpReburn option, yous do non need to install the chipset drivers, yous need to install simply the display drivers.

To install the NVIDIA display and chipset drivers after installing Windows:

1. Insert the Sun Ultra 20 M2 Workstation Tools and Drivers DVD into the DVD drive.

two. Install the chipset drivers (If necessary):

a. Change to the appropriate directory on the Tools and Drivers DVD past typing the following command:

            C:\> cd/D D:\drivers\windows\            OS            \chipset

Where Os is the directory for Windows 2003, Vista, or XP.

b. Double-click the executable file.

c. Follow the instructions in the installation software.

3. Install the NVIDIA brandish drivers:

a. Change to the appropriate directory on the Tools and Drivers DVD by typing the following control:

            C:\> cd/D D:\drivers\windows\            OS            \video

Where Os is the directory for Windows 2003, Vista, XP 32-bit or XP 64-bit.

b. Double-click the executable file.

c. Follow the instructions in the installation software.

iv. Eject the CD from the workstation.

5. If you are using the onboard ATI graphics controller, install the ATI drivers.

a. Change to the directory on the Tools and Drivers CD by typing the following command:

C:\>            cd D:\drivers\windows\            Bone            \ati\            version

b. Double-click the executable file.

c. Follow the instructions in the installation software.

6. Reboot the workstation.

three.4.2.4 Installing RealTek Sound Driver

RealTek digital audio (SPDIF) is included on the Tools and Drivers DVD. To employ this feature, you demand to install the driver.

To install the RealTek Audio driver:

one. Insert the Tools and Drivers DVD into the DVD drive.

2. Go to the Tools and Drivers DVD directory by typing the following

            C:\> cd/D D:\drivers\windows\audio\            Bone

Where Bone is the directory for Windows 2003, Vista, or XP.

three. Double-click the executable.

iv. Follow the instructions in the wizard to install the drivers.

five. Reboot the workstation.

johnstondreautall.blogspot.com

Source: https://docs.oracle.com/cd/E19127-01/ultra20m2.ws/819-6583-12/windows.install.html

when install windows what drivers are to be installed before installing

iii.ane Setting the BIOS for the Windows OS

3.one.1 Setting the Arrangement BIOS for Windows OS and NVRAID

iii.i.2 Setting the NVIDIA RAID BIOS

3.ane.3 Setting the LSI RAID Configuration

iii.2 Agreement the Diagnostic Partition

3.3 Erasing Partitions on the Boot Hd

3.iv Installing Windows 2003/Vista/XP OS Drivers

3.4.i Installing RAID Drivers Using the 2003Reburn/XPReburn Script

3.four.2 Installing RAID Drivers Using a Boot Diskette

three.four.2.1 Creating a Boot Diskette for NVIDIA RAID Drivers

3.4.ii.2 Installing Windows 2003 or XP and NVIDIA RAID Drivers

iii.iv.two.3 Installing Display and Chipset Drivers for Windows 2003, Vista or XP

three.4.2.4 Installing RealTek Sound Driver

0 Response to "when install windows what drivers are to be installed before installing"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel